A black body radiates σT4 per unit area, and any body eσAT4, with T in kelvin. In surroundings at Ts the net loss is eσA(T4−Ts4), and dividing by the heat capacity gives the rate of cooling.
Power rises as the fourth power of the absolute temperature: doubling T multiplies the power by 16. σ=5.67×10−8 W m⁻² K⁻⁴.
Double T, 16 times the power.Emitted minus absorbed.
Net radiation
dtdQ=eσA(T4−Ts4)
A body emits eσAT4 and absorbs eσATs4. Rate of cooling mseσA(T4−Ts4) ∝ A/m: small and hollow bodies cool faster.
Worked example
A heater element
Much hotter than its surroundings, the element's absorption can be ignored: P=σAT4.
1 kW from 200 cm²: about 969 K.
Summary
Key formulas
E=σT4 Stefan–Boltzmann law
P=σAT4 Stefan–Boltzmann law
P=eσAT4 Stefan–Boltzmann law
dtdQ=eσA(T4−Ts4) Net radiation with surroundings and rate of cooling
dtdT=mseσA(T4−Ts4) Net radiation with surroundings and rate of cooling
Worked examples
One for every idea
Stefan–Boltzmann law
1. An electric heater of power 1 kW has a heating element of surface area 200 cm². Treating it as a black body much hotter than its surroundings, find its surface temperature.
P=σAT4: 1000=5.67×10−8×0.02×T4.
T4≈8.82×1011.
T≈969 K (the book gives 969.3 K).
Net radiation with surroundings and rate of cooling
2. A solid metallic sphere of diameter 20 cm and mass 10 kg at 327 °C hangs in a box kept at 27 °C. Specific heat 420 J kg⁻¹ °C⁻¹. Find the rate at which its temperature falls.
A=4π(0.1)2, T=600 K, Ts=300 K.
dtdQ=σA(6004−3004)≈866 W.
dtdT=10×420866≈0.206 °C/s.
Net radiation with surroundings and rate of cooling
3. A ball of radius 1 cm with emissivity 0.3 is held at 1000 K in a vacuum chamber with walls at 300 K. Find the electrical power needed to keep its temperature constant.
Power in = net radiation: eσA(T4−Ts4).
0.3×4π(0.01)2×5.67×10−8×(10004−3004).
≈ 21.2 W (the book gives 21.1 W).
JEE-style question
Your turn
The radius of a black sphere is doubled and its absolute temperature is halved. The power it radiates becomes:
(a)1/8 of the original
(b)1/4 of the original
(c)the same
(d)4 times the original
Show the answer and the traps
P ∝ r²T⁴ = 4 × 1/16 = 1/4: option b.
1/8 takes the area as proportional to r instead of r².
1 uses T² instead of T⁴.
And 4 counts only the bigger area and forgets the temperature.
Watch out
Common mistakes
Writing σA(T−Ts)4It is σA(T4−Ts4).
Using °C in T4, or forgetting eUse kelvin, and include the emissivity of a non-black body.
Confusing rate of heat loss (∝ A) with rate of cooling (∝ A/ms)Read which one the question asks for.
Practice
Try these
1. A black sphere of radius 5 cm is at 500 K in empty space (neglect absorption). Find the power it radiates.
σ⋅4πr2T4≈111.3 W.
2. A black body is heated from 27 °C to 327 °C. By what factor does its radiated power increase?
(300600)4=16.
3. Two solid spheres of the same material, radii 1 cm and 2 cm, are at the same temperature. Find the ratio of their rates of heat loss by radiation.
∝ r2: 1 : 4 (their rates of cooling are 2 : 1).
4. (Book, PE 4.2 i) A 500 W lamp loses all its energy by radiation from a filament of area 2.0 cm² and emissivity 0.5 (σ = 5.7 × 10⁻⁸). Estimate the filament's temperature.
T4=0.5×5.7×10−8×2×10−4500⇒T≈3060 K.
5. (Book, PE 4.2 ii) A white-hot wire at 3000 K has radius 0.075 cm and emissivity 0.35 (σ = 5.7 × 10⁻⁸). Find the power radiated per unit length.
eσ(2πr)T4≈7615 W/m (the book gives 7611 W/m).
6. (Book, PE 4.2 iii) A 60 W tungsten filament at 2000 K has emissivity 0.30 (σ = 5.7 × 10⁻⁸). Find its surface area.
A=0.3×5.7×10−8×2000460≈2.19×10−4 m².
7. (Book, PE 4.2 iv) A black sphere of radius 12 cm radiates 450 W at 500 K. If the radius is halved and the temperature doubled, find the power radiated.
P∝r2T4: 450×41×16=1800 W.
8. (Book, PE 4.2 v) A block at 500 K in 300 K surroundings needs 210 W to stay at 500 K; a black body of the same size needs 700 W. Find the block's emissivity.
e=700210=0.3.
9. (Book, PE 4.2 vi) A solid copper sphere of radius R and a hollow copper sphere of outer radius R are heated to the same temperature and cool in the same surroundings. Which cools faster?