layrd.liveLayer by Layer
ChemistryReaction MechanismsJEE · NEET
Reaction Mechanisms · with answers

Practice set

Try each question first, then open it for the answer. Each set links back to its part.

Learning path · Formula sheet · Practice set

Print and revise: Revision sheet (PDF) · Formula sheet (PDF, one page)

1. Which group has zero inductive effect by definition? (a) –CH₃ (b) –H (c) –Cl (d) –C₆H₅

(b) –H: the C–H bond is the standard against which −I and +I are measured.

2. Arrange in decreasing −I effect: –Cl, –NO₂, –COOH, –I.

–NO₂ > –COOH > –Cl > –I.

3. Arrange in decreasing +I effect: –CH₃, –C(CH₃)₃, –CH(CH₃)₂, –H.

–C(CH₃)₃ > –CH(CH₃)₂ > –CH₃ > –H (more methyls on the attached carbon, stronger +I).

4. Why is the effect of a chlorine atom on a carbon chain negligible beyond the second carbon?

Each carbon passes on only part of the pull it feels, so the charges shrink quickly: δ+ > δδ+ > δδδ+.

5. CH₃Cl has a larger dipole moment than CH₃I although the C–I bond is longer. Explain.

Cl is much more electronegative than I, so the charge separation in C–Cl is far greater; that outweighs the shorter bond (1.83 D vs 1.64 D).

6. Which group has the strongest −I effect? ((a) –F (b) –NO₂ (c) –CN (d) –COOH)

Option (b): –NO₂.

7. Which of the following is the strongest acid? (a) (b) (c) (d)

(c) : F has the strongest −I effect.

8. Find the of an acid with .

.

9. An acid has . Find .

.

10. Arrange in decreasing acid strength: , , , .

(more Cl, stronger).

11. Which of the following has the lowest pKa? ((a) (b) (c) (d) )

Option (a): .

12. In water, which amine is the strongest base? (a) (b) (c) (d)

(c) .

13. Arrange in increasing acidity: , , , .

(electronegativity across a period).

14. Why is ethyne more acidic than ethane?

The acetylide pair sits in an sp orbital (50 % s-character), held closer to the nucleus than an sp³ pair: 25 vs 50.

15. Arrange in decreasing basicity in water: , , , .

.

16. Which of the following is the weakest base? ((a) (b) (c) (d) )

Option (c): .

17. Which group shows a −M effect? (a) –OH (b) –NH₂ (c) –CN (d) –OCH₃

(c) –CN: it pulls π density towards itself.

18. In which direction does the π pair of a C=O group shift when a nucleophile attacks, and is this +E or −E?

Towards O, away from the attacking nucleophile: −E.

19. Why is chlorobenzene much less reactive than chloromethane towards nucleophiles?

Cl's lone pair is delocalised into the ring (+M), giving the C–Cl bond partial double-bond character, so it is harder to break.

20. Which positions of anisole () carry extra electron density, and why?

Ortho and para: the O lone pair is delocalised into the ring (+M).

21. Is vinyl cyanide () a +R or −R system? Which carbon becomes electron-poor?

−R: the CN pulls π density, so the terminal becomes δ+.

22. Which group is ortho/para-directing but deactivates the benzene ring? ((a) –CH₃ (b) –OH (c) –Cl (d) –NO₂)

Option (c): –Cl.

23. Which alkene has the lowest heat of hydrogenation? (a) (b) (c) (d)

(d): 12 α-H, the most stable alkene.

24. How many α-hydrogens does 2-methylbut-2-ene have?

9 (three groups on the double-bond carbons).

25. Arrange the radicals in decreasing stability: , , , .

> > > (9, 6, 3, 0 forms).

26. Why is trans-but-2-ene more stable than cis-but-2-ene, although both have 6 α-H?

In the cis isomer the two methyl groups crowd and repel each other.

27. Why does acetaldehyde have a larger dipole moment (2.72 D) than formaldehyde (2.27 D)?

The methyl group releases electrons by hyperconjugation (and +I), increasing the polarity of C=O.

28. Which alkene has the largest number of hyperconjugative structures? ((a) (b) (c) (d) )

Option (d): .

29. Free radicals are: (a) diamagnetic and charged (b) paramagnetic and neutral (c) diamagnetic and neutral (d) paramagnetic and charged

(b): one unpaired electron, no charge.

30. Which conditions favour homolysis: (a) polar solvent, (b) UV light, (c) acid catalyst?

(b) UV light (also heat, the vapour phase and peroxides).

31. In heterolysis of , which fragment keeps the electron pair?

Carbon (more electronegative than Li): a carbanion and .

32. Why is the benzyl radical more stable than the ethyl radical?

Its odd electron is delocalised over the ring (resonance), which outweighs hyperconjugation.

33. Arrange the C–H bonds in increasing bond energy: allylic, 3°, 1°, methyl.

Allylic (86) < 3° (91) < 1° (97) < methyl (102).

34. Which C–H bond has the lowest bond dissociation energy? ((a) (b) (c) (d) )

Option (c): .

35. Which carbocation is the most stable? (a) (b) (c) (d)

(d): the charge spreads over three rings.

36. Arrange in decreasing stability: , , , .

.

37. Why is more stable than ?

N's lone pair forms , in which every atom has an octet.

38. What is the hybridisation of the cationic carbon in the benzyl cation, and how many resonance forms does it have?

sp²; four forms (charge on CH₂, two ortho carbons and the para carbon).

39. Give the carbocation formed when benzenediazonium chloride loses .

The phenyl cation, .

40. Which carbocation is the most reactive? ((a) (b) (c) (d) )

Option (d): .

41. The shape of is: (a) planar (b) linear (c) pyramidal (d) tetrahedral with no lone pair

(c) pyramidal.

42. Arrange in decreasing stability: , , , .

.

43. Why is more stable than ?

Its charge is delocalised over three rings instead of one.

44. Which is more stable: p-nitrobenzyl anion or p-methoxybenzyl anion?

p-Nitrobenzyl: NO₂ withdraws (−M, −I) and spreads the negative charge; OCH₃ donates and concentrates it.

45. How many valence electrons does the carbanionic carbon have, and is it a nucleophile or an electrophile?

8; a nucleophile (electron-rich).

46. Which carbanion is the most stable? ((a) (b) (c) (d) )

Option (d): .

47. The electrophile that attacks the ring in the Reimer–Tiemann reaction is: (a) (b) : (c) (d)

(b) dichlorocarbene.

48. Give the products of singlet :CH₂ with propane by C–H insertion.

n-Butane (1° C–H) and isobutane, 2-methylpropane (2° C–H).

49. Which carbene state is diamagnetic, and which is a diradical?

Singlet: diamagnetic (paired). Triplet: diradical (two unpaired electrons).

50. What product forms when pyrrole reacts with :CCl₂ (with loss of HCl)?

3-Chloropyridine (ring expansion).

51. Which of these gives an isocyanide with /alc. KOH: ethylamine, diethylamine, triethylamine?

Only ethylamine (primary).

52. Which of the following amines gives the carbylamine test? ((a) (b) (c) (d) )

Option (c): .

53. Which species has a nitrogen atom with only six electrons in its valence shell? (a) (b) (c) (d)

(b) phenylnitrene.

54. m-Chloroanisole (Cl and OCH₃ meta) is treated with /liq. . Which anilines can form via the benzyne routes?

Removing H at C-2 or C-4 gives two benzynes; amination gives o-, m- and p-anisidine (via addition at either end).

55. What product does benzyne give with water?

Phenol.

56. Name the product of phenylnitrene dimerisation.

Azobenzene, .

57. p-Chlorotoluene is treated with NaNH2 in liquid NH3. The products are: ((a) only p-toluidine (b) only m-toluidine (c) p- and m-toluidine (d) o- and m-toluidine)

Option (c): p- and m-toluidine.

58. Which of these is NOT a nucleophile? (a) (b) (c) (d)

(c) : it accepts a pair (electrophile).

59. Which is the stronger nucleophile in water: or ? Why?

: a charged species beats its conjugate acid.

60. Arrange in decreasing nucleophilicity: , , , .

(across a period, follows basicity).

61. with an alkyl halide gives mainly a nitrile, mainly an isocyanide. What does this show about ?

is ambident: it can bond through C or through N.

62. Is an electrophile, a nucleophile or both?

Both (ambiphile): the carbonyl C is electron-poor, the O has lone pairs.

63. In methanol, which halide ion is the strongest nucleophile? ((a) (b) (c) (d) )

Option (d): .

64. Conversion of into : by a base is an example of: (a) β-elimination (b) α-elimination (c) γ-elimination (d) substitution

(b) α-elimination.

65. Classify: .

Nucleophilic addition.

66. What is the hybridisation change at carbon when ethyne is reduced to ethane?

sp → sp² → sp³.

67. Ethanol heated with conc. at 170 °C gives ethene. Which type of reaction is this?

β-elimination (dehydration).

68. Conversion of 1,3-dibromopropane into cyclopropane with zinc is an example of: ((a) α-elimination (b) β-elimination (c) γ-elimination (d) rearrangement)

Option (c): γ-elimination.

69. The free-radical halogenation of methane that is overall endothermic is: (a) fluorination (b) chlorination (c) bromination (d) iodination

(d) iodination (+13 kcal/mol).

70. Why does chlorination of methane not occur in the dark at room temperature?

No radicals form: light (or heat, or an initiator) is needed to split .

71. Toluene + in light gives which product? Through which intermediate?

Benzyl chloride, via the benzyl radical.

72. Why does oxygen slow down the chlorination of methane?

It traps methyl radicals as , breaking the chain.

73. Which product forms when propene reacts with NBS (light)?

Allyl bromide, .

74. Cyclohexene reacts with NBS in CCl4 under light. The main product is: ((a) trans-1,2-dibromocyclohexane (b) 3-bromocyclohexene (c) bromocyclohexane (d) 1-bromocyclohexene)

Option (b): 3-bromocyclohexene.

75. Which alkyl bromide reacts fastest with NaCN in DMSO? (a) (b) (c) (d)

(c) : least hindered (neopentyl is very slow).

76. Why does not react with by SN2, while + HBr gives ?

is a very poor leaving group; in HBr the O is protonated and leaves as , a good leaving group.

77. How does the rate of an SN2 reaction change if both [RX] and [Nu⁻] are doubled?

It becomes four times as fast (Rate = k[RX][Nu⁻]).

78. Arrange in decreasing SN2 reactivity: 2-bromopropane, bromomethane, 1-bromopropane, 2-bromo-2-methylpropane.

Bromomethane > 1-bromopropane > 2-bromopropane > 2-bromo-2-methylpropane.

79. Why is (phenacyl bromide) far more reactive towards SN2 than ?

The adjacent C=O stabilises the transition state (relative rate about 100 000).

80. Which reacts faster with in DMF: or ? And in methanol?

In DMF (aprotic) can be faster (stronger base, unsolvated); in methanol is faster ( is caged).

81. In which solvent is the SN2 reaction of azide ion with 1-bromobutane fastest? ((a) (b) (c) DMSO (d) )

Option (d): .

82. Which statement is true for an SN1 reaction of a chiral 3° alkyl halide? (a) Rate depends on [Nu⁻] (b) Complete inversion occurs (c) Racemisation with some inversion occurs (d) No intermediate is formed

(c).

83. Neopentyl bromide is heated in ethanol. What is the main substitution product, and why isn't it neopentyl ethyl ether?

2-Ethoxy-2-methylbutane: the 1° cation rearranges by a methyl shift to the 3° cation before ethanol captures it.

84. (S)-3-Bromo-3-methylhexane undergoes SN1 hydrolysis. Is the product optically active?

Largely racemic (slight excess of the inverted alcohol), so it shows little or no optical activity.

85. 2-Bromo-3-methylbutane is warmed in water. The main alcohol formed is: ((a) 3-methylbutan-2-ol (b) 2-methylbutan-2-ol (c) 3-methylbutan-1-ol (d) 2-methylbutan-1-ol)

Option (b): 2-methylbutan-2-ol.

86. Which gives the faster SN1 reaction: or ? Why?

: iodide is the better leaving group, and it leaves in the slow step.

87. Allyl chloride reacts by both SN1 and SN2 faster than propyl chloride. Explain.

The allyl cation (SN1) and the SN2 transition state are both stabilised by the adjacent π bond.

88. Why does speed up the SN1 reaction of an alkyl halide?

pulls off the halide (precipitating AgX), helping ionisation (Lewis acid catalysis).

89. Benzyl chloride in water vs benzyl chloride with NaCN in DMSO: which mechanism in each?

Water: SN1 (stable benzyl cation, weak Nu, polar solvent). NaCN/DMSO: SN2 (strong Nu, aprotic solvent, unhindered 1° carbon).

90. 2-Chloro-2-methylpropane undergoes SN1 solvolysis fastest in: ((a) ethanol (b) methanol (c) formic acid (d) water)

Option (d): water.

91. In the nitration of benzene, the attacking electrophile is: (a) (b) (c) (d)

(c) the nitronium ion.

92. Why is needed for the bromination of benzene but not of ethene?

Benzene's aromatic π system is less reactive; polarises to give a strong electrophile ().

93. How many resonance forms does the arenium ion have, and where is the positive charge?

Three; on the two carbons ortho and the carbon para to the sp³ carbon.

94. The rate-determining step in the nitration of benzene is: ((a) formation of NO₂⁺ (b) attack of NO₂⁺ on the ring (arenium ion) (c) loss of H⁺ from the arenium ion (d) protonation of HNO₃)

Option (b): attack of NO₂⁺ on the ring (arenium ion).

95. Predict the major product of propene + HI.

2-Iodopropane (via the 2° cation).

96. What is the major product of 2-methylpropene with HBr (no peroxide)?

2-Bromo-2-methylpropane (3° cation).

97. 3-Methylbut-1-ene reacts with HCl. Give the major product.

2-Chloro-2-methylbutane (after a hydride shift).

98. Why does pent-2-ene give a mixture with HBr?

H⁺ on either carbon gives a 2° cation, so both 2- and 3-bromopentane form.

99. 3,3-Dimethylbut-1-ene reacts with HBr. The major product is: ((a) 2-bromo-3,3-dimethylbutane (b) 2-bromo-2,3-dimethylbutane (c) 1-bromo-3,3-dimethylbutane (d) 1-bromo-2,3-dimethylbutane)

Option (b): 2-bromo-2,3-dimethylbutane.

100. Addition of Br₂ to cis-but-2-ene gives: (a) meso-2,3-dibromobutane (b) racemic 2,3-dibromobutane (c) 1,2-dibromobutane (d) only (2R,3R)-2,3-dibromobutane

(b) Racemic: anti-addition to the cis alkene gives (2R,3R) and (2S,3S) in equal amounts.

101. Which product is optically inactive: Br₂ + cis-but-2-ene, or Br₂ + trans-but-2-ene?

trans-But-2-ene: it gives meso-2,3-dibromobutane.

102. Name the intermediate that makes bromine addition anti.

The cyclic bromonium ion: it blocks one face, so Br⁻ attacks from the other.

103. Buta-1,3-diene + 1 mol HBr in acetic acid at 40 °C: which product predominates, and why?

1-Bromobut-2-ene (1,4): high temperature and an ionising solvent favour 1,4-addition.

104. Buta-1,3-diene reacts with 1 mol HBr at 40 °C. The main product is: ((a) 3-bromobut-1-ene (b) 1-bromobut-2-ene (c) 1,4-dibromobut-2-ene (d) 2-bromobut-1-ene)

Option (b): 1-bromobut-2-ene.

105. The peroxide effect is observed with: (a) HCl (b) HBr (c) HI (d) HF

(b) HBr: only with HBr are both propagation steps exothermic.

106. Give the product of but-1-ene + HBr in the presence of peroxide.

1-Bromobutane (Br• adds to C-1, giving the 2° radical).

107. Why does HI not show the peroxide effect?

I• + alkene is endothermic, so iodine atoms combine to I₂ instead of adding.

108. Propene + CCl₄ with peroxide gives what?

CH₃CHClCH₂CCl₃ (1,1,1,3-tetrachlorobutane): •CCl₃ adds to CH₂, the 2° radical takes Cl from CCl₄.

109. Propene reacts with HBr in the presence of benzoyl peroxide. The main product is: ((a) 2-bromopropane (b) 1-bromopropane (c) 1,2-dibromopropane (d) 3-bromopropene)

Option (b): 1-bromopropane.

110. Which compound is most reactive towards nucleophilic addition? (a) CH₃COCH₃ (b) C₆H₅COCH₃ (c) CH₃CHO (d) CCl₃CHO

(d) CCl₃CHO: the −I CCl₃ group makes the carbonyl carbon most electron-poor.

111. Arrange p-nitrobenzaldehyde, p-methoxybenzaldehyde and benzaldehyde in decreasing reactivity towards HCN.

p-Nitrobenzaldehyde > benzaldehyde > p-methoxybenzaldehyde.

112. Propanone + CH₃MgI, then water: give the product.

2-Methylpropan-2-ol, (CH₃)₃COH.

113. Why is the alkoxide intermediate formed in preference to a carbocation in carbonyl additions?

Oxygen is more electronegative and carries a negative charge far better than carbon carries a positive one.

114. Which compound is least reactive towards nucleophilic addition of HCN? ((a) HCHO (b) CH₃CHO (c) CH₃COCH₃ (d) C₆H₅COC₆H₅)

Option (d): C₆H₅COC₆H₅.

115. Dehydration of pentan-2-ol with conc. H₂SO₄ gives mainly: (a) pent-1-ene (b) pent-2-ene (c) 2-methylbut-2-ene (d) pentane

(b) Pent-2-ene (80 %): the more substituted alkene (Saytzeff).

116. Why is the ratio of SN1 to E1 products from tert-butyl chloride, bromide and iodide the same?

All three give the same tert-butyl cation; the leaving group is gone before substitution or elimination is decided.

117. Which dehydrates faster with acid: butan-2-ol or but-3-en-2-ol? Why?

But-3-en-2-ol: it gives a conjugated diene (and an allylic cation).

118. Neopentyl alcohol is heated with conc. H₂SO₄. Give the main alkene.

2-Methylbut-2-ene: the 1° cation rearranges by a methyl shift to the 3° tert-amyl cation, which loses H⁺ (Saytzeff).

119. 2-Bromo-2-methylbutane is heated with potassium tert-butoxide. The main product is: ((a) 2-methylbut-2-ene (b) 2-methylbut-1-ene (c) 2-methylbutan-2-ol (d) 2-tert-butoxy-2-methylbutane)

Option (b): 2-methylbut-1-ene.

120. For an E2 reaction, the preferred arrangement of the β-H and the leaving group is: (a) syn-periplanar (b) anti-periplanar (c) gauche (d) perpendicular

(b) Anti-periplanar: staggered and lower in energy.

121. Write the rate law for E2 and say what doubling [base] does.

Rate = k[RX][Base]; doubling [base] doubles the rate.

122. 1-Bromo-1-methylcyclohexane is heated with (a) C₂H₅ONa and (b) KO-t-Bu. Which alkene does each base favour?

(a) 1-Methylcyclohexene (endocyclic, Saytzeff). (b) The bulky base removes the less hindered CH₃ hydrogens, shifting the product towards methylenecyclohexane (exocyclic, Hofmann).

123. Neopentyl bromide, (CH₃)₃CCH₂Br, is heated in ethanol. Why does it give 2-methylbut-2-ene and not a simple alkene?

It has no β-H, so E2 is impossible; ionisation gives a 1° cation that undergoes a 1,2-methyl shift to the 3° cation, which loses H⁺ (E1) to give 2-methylbut-2-ene.

124. An elimination follows Rate = k[RX][Base], shows no rearrangement and needs the β-H anti-periplanar to X. The mechanism is: ((a) E1 (b) E1cB (c) E2 (d) SN2)

Option (c): E2.